#COVER DESK WITH FABRIC FREE#

Use a paper towel or rag to rub shoe polish or transparent gel stain in a color you like over the ripped up taped surface. Rip 2″ sections of beige masking tape and slightly overlap them to cover the board.Use decoupage medium to slightly overlap the pieces to cover the folding Cut up or rip the paper into 2″ – 3″ size pieces.You can make them to fit the size of your fireplace opening as well as the style of decor depending on the fabric or paper you use. More Fireplace Summer Cover IdeasĪs you can see, it is easy to make your own fireplace screen from the 3 decorative folding fireplace cover screens I made. You can add more gift wrap to the back of the screen to create a more finished look or leave as it is. When adhesive is tacky, fold over gift warp as shown in (Fig. Cut excess gift wrap as shown to wrap around the boards edges. I used tape to secure the tips of the fasteners to the back of the screen.ħ. I used an awl to make a hole in the center of the circles on the fabric.

#COVER DESK WITH FABRIC FREE#

Make sure the fabric attached to the back is free of air bubble and it smooth.ĭepending on the pattern of your fabric/paper, you can add brass fasteners for a decorative accent. If needed to smooth corners, add more spray adhesive to make sure the fabric/paper is secure. Cut or fold corners on an angle to cover corners. Wrap the excess fabric/paper to the back and press into the tacky adhesive.

Apply spray glue all around the edges of the board – about 2″ in from the outer edges.

Turn board over so back of board in face up. Smooth the fabric/paper to the outer edges of the cardboard screen to make sure there are no air bubbles and wrap the excess to the back. Throughly cover the board and let sit until the adhesive gets tacky – about 1 – 2 minutes.Ĭarefully center the fabric/paper on the board. Use spray adhesive to attach the fabric or paper to the board. Make sure you center any pattern if there is one. Lay board right side down on the back of the fabric/paper. Press fabric if needed before attaching to the board.ĭouble check: To make sure you have enough fabric/paper before attaching. Specifically, this protective cover is individually made to fit the specifications of a HP Deskjet 2700e / 2722 / 2732 / 2752 / 2755. Measure the board and your fabric or paper so that there is at least 2″ of excess fabric/paper all around to wrap around the back of the board. Our dust covers are machine sewn with heavy duty thread to make sure they will never fray or come apart, and the bottom is double hemmed for a good fit that stays put.

The Best DIY Chalk Paint Recipe For Painting Furniture.

Chalk Paint Furniture Before & After Makeovers.

Tips That Will Make Paint Clean Up… Easy!.

Cover desk with fabric